Fit sucked, it’s not Accumount’s fault, as all rifles aren’t exactly the same. However the front locking nut underneath protrudes too low and have to remove mount to take bolt out on a NO4 MK*, I suspect tou might not need to on a NO4 MK1 be ause of the difference in bolt removal, but didn’t check. No instructions included nor on their website (even though it’s a straight forward and supposedly easy install), and no written or video instructions on website as their competitors provide. Great quality, steel versus aluminum, although if you have an aluminum mount with pins that hold instead of screws that loosen, you should be good. Don’t let this review be the all to say about this product as this was an individual experience may be different for you. And for sure don’t let it reflect on their other mounts, as they require their own review. I just wasn’t happy with it and got a Fulton that lets me remove the bolt without removing the mount. If Accumount wants to counter that, then give me damn instructions as how to accomplish that.Read full review
Verified purchase: Yes | Condition: New
The threaded rear screw mounts did not line up, had to file surface opposite wedge to get to line up. I have read on the internet where people wallowed out the rear sight mount holes... I would not suggest that at all!!! I had to file down the slant on the wedge until it was flush with the bottom of the mount rail and it would allow the bolt to be reinstalled. All in all its an impressively simple sight once it is fitted. If you have common sense, patience and some metal files. You will get it installed.
Verified purchase: Yes | Condition: New
I've had a flimsy scope mount on my old Enfield rifle for years that kept it from shooting accurately. The RSM mount worked great! The design is simpler and it went on the gun in minutes. It's a very solid piece of gear. I shot the rifle a few days back and it's as accurate now as I hoped it would be all along.
Verified purchase: Yes | Condition: New
Took some grinding to get clearance for bolt to operate correctly. Could be closer tolerance because tightening rear screws too much will prevent movement of bolt. Well made. Very stable. Too expensive.
Verified purchase: Yes | Condition: New
Verified purchase: Yes | Condition: New