With some online tutorials I was able to hack this supply to be a 12 volt power supply. You can use it for a variety of things such as powering a radio or a battery charger. Use at own risk, but it is a good value and the power is clean and reliable.
Verified purchase: Yes | Condition: Pre-owned
Great for converting to use as R/C charger power supply. You can use a receiver switch as an on/off switch (doesn't have one), or forgo a switch altogether. Solder on terminals directly to the output tabs. Provides reliable amperage. I pull 30A for regular charging without a hiccup on an iCharger X6.
Verified purchase: Yes | Condition: Pre-owned
These arrived looking brand new. I adjusted an internal pot to get 12.7 volts, and put a 220 ohm resistor across the first and fourth small pads (from the left) on the rear to make the supply assume "ON" state. They work well. DO NOT FALL FOR THE FAKE YOUTUBE VIDEO CLAIMING YOU CAN USE A 1.8K RESISTOR IN ANOTHER LOCATION TO BOOST THIS SUPPLY TO 13.8 VOLTS! IT WILL FRY YOUR RESISTOR, AND MAY DESTROY YOUR SUPPLY! By the way, THIS SELLER has NOTHING to do with that misleading video. Just wanted to warn you. Do not get these supplies if you REQUIRE 13 volts or more for your application. It will not work.
Verified purchase: Yes | Condition: Pre-owned
Bought these as a 12VDC power supply. You do have add a jumper to specific pins (youtube for details). for them to work. Both units work as stated producing lots of amps. The ones I got look band new. Good value for the money.
Verified purchase: Yes | Condition: Pre-owned
This power supply is amazing and it causes no interference to a local nearby receiver. I am using it to power a Xiegu G90 radio and a HLA300 RM Italy linear and it works well. No interference since the switching frequency appears to be in the 300 Khz raqnge. Will be getting more before long.
Verified purchase: Yes | Condition: Pre-owned
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Server Power Supplies