 |
Well, so far so good. However, we will have to see how it holds over time. Just got done with a rust fixing project on my car. I had to fabricate 5-6 metal patch panels to fix the holes. I was going to use seam sealer and rivets, but then I found this product and thought it would do a better job. I watched some videos on how to use and some ideas beyond just an adhesive function. I ended up using it as a filler and sealer on areas around the patch panel, and to smooth out the transition between panels. I used the nozzles, and I pumped it out onto cardboard for applications that needed an "icing" layer to adhere. Probably saved me some time and likely will provide a better seal than using rivets. Also, I chose this model because of the 1/4/24 hour work/clamp/cure time. I looked at other brands that had all the way down to a 7 minute work time. as well as the 3M 08116 which has a 1.5hr work time. Glad I did not go with the quick one. The 1hr work time gives you plenty of time to get things right, and tackle several areas in one session. Anyway, I only gave it 4 stats because it is just so expensive, and you HAVE to use the 3M applicator, which is also expensive.Read full review
Verified purchase: Yes | Condition: New
Used to glue a Corvette C3 door skin where the seam had come loose due to worn door hinge bushings and pins allowing the door to strike the body when closing. The product appears to be very similar to JB Weld. The gun mixes the epoxy and hardner automatically in the nozzle as it is applied allowing it to be directly inserted into the bonding area. Appears to be stronger with less fumes than JB or other epoxies and completely seals areas from moisture. Can grind,sand and paint if needed. Downside is slightly costly but if you purchased same amount of JB Weld it would be about the same. Also nozzles are a one time use and are left on when finished for storage to use the epoxy again. Unknown if long term storage will affect the compounds in the tubes as the chemical reaction may slowly work its way back. Extra nozzles may be ordered if needed at about $2 apiece. Read full review
Verified purchase: Yes | Condition: New
i am a professional body man and have used this product since it came out many years ago, it is the best there is . have used other brands and had mixed results ! always stick with what works,,,,,, Always!
Verified purchase: Yes | Condition: New
this product is super strong and easy to use ! (follow instructions). I have used it on many panels, dont think it has ever failed me when applying to clean, shiny surfaces.
Verified purchase: Yes | Condition: New
I used this to bond replacement panels on my Yukon. Works awesome, the only thing is you do not have 90 minutes working time. Closer to 30 minutes. No big deal, just plan what you are going to do and don't mess around. Highly recommended.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Other Auto Tools & Supplies
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Other Auto Tools & Supplies
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
