This was a very economical tune-up for an 8-year-old grill. The burner covers fit perfectly as did the burner tubes and crossover pieces. Other reviews are correct about the crimping for the ignitors. The existing brackets did NOT fit the tubes. This can be fixed by bending out the ends of the existing ignitor clips and using the supplied band clamps by slipping them over the old clips. Thought I was done, but NO flame. The problem was that the holes on the BOTTOM of the burner tubes were about 3/4 inch further along the tubes than the old ones. I had to loosen the clamps slightly and slide the ignitors away from me so that the spark box was directly under the holes. The gas accumulates in the little metal box, there's a spark and Voila! Bring on the burgers!
Verified purchase: Yes | Condition: New
I thought this set of pieces would fit my Commercial Series grill. The burner tubes were too big in circumference to be able to clip on ignitors. Guess I will have to wire them on. The ends of the burner tubes with the "slits", I had to drill a hole to fit the PIN and retainer clip. The "cross over pieces were not long enough...and made for the opposite ends of the burners. I can't use that mess either. Heat reflectors are made a lot different.MIGHT be able to use...we'll see. Make sure you measure your pieces.
Verified purchase: Yes | Condition: New
These replacement parts for my Char-Broil Grill were easy to replace and they saved me hundreds of dollars from having to buy a brand new grill
Verified purchase: Yes | Condition: New
This product fit my grill in all phases except where the igniter fits on each of the gas burners . The crimped part of the 4 burners is not the same crimp as is on my original burners. I had to use 4 stainless steel hose clamps and clamp the egniters to each burner. Cheap fix.Works great.
Verified purchase: Yes | Condition: New
Kit was excellent. It has extended the life of my grill by years.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Barbecue Tools
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Barbecue Tools