Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Motherboards
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Motherboards
I bought the H8DGI-F to replace my old H8DGU-F board that I was using in my workstation. The H8DGI-F is much, much better suited to being a workstation board. I have this paired with: heavily modified Norco RPC-430 short depth case (hint - remove drive bay shelf) 2x Opteron 6276 w/ 2x DeepCool Gammaxx S40 coolers (custom mounting required) 64gb ddr3 ECC quad rank memory (16x 4GB dimms) Radeon HD 7870 Micron P320h PCIE Flash Accelerator aka SSD (vm storage) Mellanox Connect-X2 10Gb nic LSI 9200-8e SAS HBA In my case, the system is a hypervisor, and my workstation is actually a VM on this system using PCI passthrough for the GPU. This board is very well suited to this application as the IOMMU grouping puts each slot in its own group, and with dual chipsets you can put host peripherals on the slots of one chipset, and VM dedicated peripherals on the other for better latency and throughput. I'm somewhat concerned about the lack of cooling for the VRM on the cpu towards the front of the system, in between the socket and the ATX power connectors. Adding cooling to that area will be pretty difficult due to the extremely constrained space that it's in, though it hasn't been an issue yet.Read full review
Verified purchase: Yes | Condition: Pre-owned
I used twoSuperMicro SNK-P0043P Passive CPU Heatsink for AMD Socket G34 on the SuperMicro AMD H8DGI-F Motherboard Dual Socket G34 Opteron 6200 6300 When I started the computer it became very hot, so I decided to screw a 70x70mm fan on each of the heatsinks to avoid burning the CPU:s I don't know if this was neccesary, but I paid a lot of money for the CPU:s so I didn't want to take the chance, and burn the CPU:s The computer works well and it seems to be fast and efficient Otherwise I'm satisfied with my purchase.
Verified purchase: Yes | Condition: Pre-owned
surprised myself with this as i didn't think my low bid would actually get it. I do wish it was the H8DG6 model as that one has a built in SAS controller. but, those are hard to come by at a good price.
Verified purchase: Yes | Condition: Pre-owned
This is really one professional piece of Motherboard.
Verified purchase: No
Хороший продавец, упаковано качественно, плата как новая, драйверов и батарейки нет
Verified purchase: Yes | Condition: Pre-owned