The product itself is an excellent product. Works great, good quality, looks good. The installation is a little tricky. The "one size fits all" claim is not entirerly accurate. I had to take mine to a machine shop and have them cut off about 3" to make it fit. The spacers provided where not enough to keep it from dragging the ground. I had to drill 3 holes in my discharge chute to make it fit but that was not big deal. Installation instructions are not great so go on You Tube and watch for a better description. Overall I think this is a great product and I would recommend it to anyone.
Verified purchase: Yes | Condition: New
Assembly is easy, operation is easy, however, it throws grass clippings all over you and your deck when closed. The cover does prevent about 90% of grass from going out. About 50% of blocked grass ends up on you and your deck, the other 40 ends up in a line of clumps depending on the dryness of grass. Wet grass obviously will clump badly where as dry grass will be a line of clippings minus clumps. Overall I’m not happy with this product, and removed it from my mower. I did use it 5 times before writing this review and deciding on how I felt about it. My purpose in this purchase was to be able to mow around and between flower beds and not throw clippings back into them.
Verified purchase: Yes | Condition: New
It works great but during installation they need to give a template for drill holes. The first holes I drilled the flap looked flat against the discharge chute once tightened it pulled it away about 1/2 an inch and it would cover the mower in grass clippings when down. I had to remove bolts and drill holes a little farther back to let it set flat against the discharge chute and that held the grass in. It was on a quick cat and I had to use several spacers because of the deck design that might have been part of the issue.
Verified purchase: Yes | Condition: New
put this on scagg tiger cat 52" not a direct fit but pretty good for a one fits many application went on well drill 3 holes bolt on with spacers. made a modification on the slot of lift arm to allow plate to retract back far enough to be flush with edge of deck other than that all is good . will be putting this on my other mowers as time allows
Verified purchase: Yes | Condition: New
Plate is bent in the middle, leaving a gap and it covers you in grass clippings and dust. It should come with a rubber seal so you can attach it to fill the gap for a good seal, not allowing any blow back. I purchased some 1”x1” foam weather stripping and attached it to the top edge of the deck. (Got that idea from a YouTube video of a guy that had the same problem)Not sure how long it will last but it helps.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Lawn Mower Parts
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Lawn Mower Parts