Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Solder
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Solder
Good stuff, easy to use. I keep refrigerated between uses, as recommended by Kester. I found that it may be used directly from the refrigerator, i.e., no warm-up required. Works well with an SMD heat gun for soldering components.
Verified purchase: Yes | Condition: New
Warning: it has lead, use in well ventilated area. This solder works great; heated, melted, flowed really well. you get 5 tips that are of useful size ( not too small and not too big ).
Verified purchase: Yes | Condition: New
This paste is far superior to knock of brands that sell for less. Flows nicely, at lower temperatures. The only complaint I would have is that the needles get clogged. Anyone would expect them to. However, they are nearly impossible to clear. In my case, I ran out of needles before solder. I now put my last two needles in an ethanol bath and run a small wire through them to keep them clean.
Verified purchase: Yes | Condition: New
This worked well at around 265 - 270 Celsius. The only real problem I had with it is that is like trying to squeeze peanut butter through a syringe. Difficult for most people especially with the smaller tips and made it difficult to deposit tiny amounts to very small IC pads. Overall it worked well and seems to give good results. I've repaired 3 boards so far and all worked first time. Overall it performed well
Verified purchase: Yes | Condition: New
I started using the Kester solder paste when I got a resistance soldering unit. I build and repair brass models and the Kester solder paste in the 63/37 mix provides excellent joints with moderate heat. It cuts building time because you can apply the paste and heat immediately.
Verified purchase: Yes | Condition: New