CURRENTLY SOLD OUT
 | Shop by category |
{"delay":300}
|
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Air Compressors
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Air Compressors
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
I bought this replacement pump after a piston rod broke on the OEM pump. After a few minor adjustments for a slightly larger diameter fly wheel, this pump works excellent. The air outlet port is on the left side as you look from the flywheel side, and this matched the OEM. I've got it running at 1150 rpm, so it is supplying between 10-12 cfm at 90 psi, and is quiet running to boot! So far, this pump seems to be a great product.
Verified purchase: Yes | Condition: New
I've bought this pump spent many outs making mounts bolting it to my tank I've used it for 20 mins tops and the pump is already seizing up! Do not waste your time or money on this product! I would have been better off going to harbor freight! At least then I could get a new one same day!... do not waste your money on this product extremely disappointed!
Verified purchase: Yes | Condition: New
Came in good shape, bolted on in same holes so it was an easy install. The 14 inch pulley that can on the pump was 2 inches bigger than my original one so just put a little bigger one on the motor just to get pump RPMs up a little more to about 1100, I'm running it up to 140 psi to air big truck tires. Seems to work pretty well but pump does have a bit of a vibration to it, glad I went with the 2 year warranty plan just to be safe. Also with the bigger 14inch pulley the safety shroud for the belt wont fit around the pulley but sence i got a tall up right 60 gallon tank and its against the wall its pretty safe. Would have been five stars if the shroud if back on. Will up date review after summer.
Verified purchase: Yes | Condition: New
I bought this pump to replace an older Craftsman unit which had served faithfully for many years. The pump came well packaged and in perfect condition. Installation was fairly simple with only minor modifications. I am running the pump at 1150 rpm and the output is impressive. The only negative comment I have is that there is a moderate amount of vibration while running, presumably due to an imbalance condition. I am considering slowing the pump speed to 950 rpm to see if it improves.
Verified purchase: Yes | Condition: New
It was a replacement for a Campbell Hausfeld 6.5hp but it does ok. I had to replace the belt on my motor as the original belt was a flat ridged belt and this compressor requires a v-belt. Seemed a little slow to fill the 60 gal tank to 120psi initially. I cycled it thru a few cycles and checked for leaks etc. I have it starting at 80psi and shutting off at 120psi and it would do that in about 2min which is adequate.
Verified purchase: Yes | Condition: New
