CURRENTLY SOLD OUT
 | Shop by category |
{"delay":300}
|
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Computer Cases
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Computer Cases
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
Okay value for the price, the standoffs for the motherboard have to be manually installed (not a big problem, but is annoying), the steel for the add-on card slots are very cheap and bend very very easily. The spacing is my biggest complaint; with a regular ATX motherboard and liquid-cooling radiator, there is just no clearance for any cables/leads without needing to constantly adjust and readjust their positioning so that they can be plugged in and still be out of the way for good airflow. An ATX motherboard is also pretty flush next to the power supply so there's no clearance there either. Cable management was difficult because of the lack of clearance. The HDD cage and other optional areas had a lot of room in comparison, the case lacked the space in necessary parts but had too much excessive space in non-essential areas. It's a case that works, but be prepared to spend quite a bit of time with cable management.Read full review
Verified purchase: Yes | Condition: New
Extremely well built, sturdy- yet surprisingly light. The drive bay system of sliding drawers, and the orientation of your HDD/SSD makes for a clean, cable-managed appearance, plus the drives receive maximum airflow while mounted in a longitude direction. The 2 included large case fans make keeping your Rig cool easy. The newest trend is for the PSU (Power Supply Unit) to be mounted in the "basement" of the case, to allow for it's own, maximum cooling and RF isolation. There is plenty of room in this case, even for a liquid cooled system & it's components.
Verified purchase: Yes | Condition: New
Lots of room for cable management and video card(s). Light weight considering the size. Comes with internal 5.25" to 3.5" tray (removable). Also comes with two very good 120mm fans (no lights) rear, and front. Has top vents to place 2 or 3 different sized intake/exhaust fans. You can also put another front fan in where there is a huge open space. Also has bottom vent for the power supply. Side panels are easily removed, not sticky. The feet on the bottom are large enough to allow air flow to the bottom, allowing the power supply fan to actually breathe. I purchased this on sale for $68 CDN including tax. That's a very good price. I think more than $80 is too high a price. There is NO HDD indicator lamp, but a person can remove the front panel, drill a little hole and then place a HDD lamp and cable into it and connect to the motherboard, if not having that indicator annoys you. There is also no reset button, but I suppose that's becoming passe also.Read full review
Verified purchase: Yes | Condition: New
The case is well laid out, I love the slide in easy disconnect hard drive bay (3). Cable management is easy. There is space for 2 fans in the front of the case (1 included 120mm) and there is a 3 fan bay at the top for water cooling or? I like this case alot especially for the $45 + tax delivered.
Verified purchase: Yes | Condition: New
Biggest case I've used in a very long time and apparently it's not even a full tower. Not sure about the top but if I don't put anything heavy on it then it works.
Verified purchase: Yes | Condition: New
