Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in 3D Printers
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on 3D Printers
Great product, put together with a 12 year old child who has escaped the school system for home schooling. The directions were decent. The filament detector and adjusting the z axis stop were the hard part (took a minute to puzzle out how the filament detector expected to go, the z-axis limit was removed from the rail to install the connector, so had to re-adjust). Didn't watch the video, so can't comment if that would have answered questions. Did the four point bed leveling adjustment twice to get bed level with sheet of paper test. Added a bit more gap after running around X and Y (traversing between corners) with Z=0 and seeing bumps in the glass bed that touched, maybe 1/2 turn back-off on each. Printed the demo dog from the card with generic PLA, default 50C bed, 210C extruder. Printed great, looks good. Didn't use a glue stick, finished print around midnight, took off bed when cool at 2:30 am, no corner lifting, no horrible fight to get it off the bed. I would buy the A10M or A30 next time. Already ordered the A10 A10M upgrade kit. The A10M is ready for installation of the auto leveling sensor, the A10 has a plug-in on the head for one connector, you need to extend/run a pair of wires for the other connector down to the control board. I use Cura to generate G-code files, I will add a wireless adapter to this printer. I started with a FlashForge Finder without a heated bed. I use Ultimaker 3's at the University where I work. The items produced by this printer are of comparable or better quality than the $3500 Ultimaker 3's.Read full review
Verified purchase: Yes | Condition: New
The hardware is very solid with good and fast prints. The firmware with mine wasn't patched to the lastest compatible with the sensor I added but it was an easy fix because it's all Open Source. I've gotten to switch among several different softwares to find the option which works best because none of it is proprietary. I'm really enjoying this product immensely.
Verified purchase: Yes | Condition: New
It's a little hard for me to lvl the bed. The first control board went out right away but a second was sent out. I have maybe 100-200hrs printing in. Frame seems good. I prefer masking tape to the special bed for pla but I use the bed for abs.
Verified purchase: Yes | Condition: New
The printer was delivered on time. It is very easy to anssemble and use, when is working is a very quiet machine in comparison between with other 3D printers. The accuracy of the objects printed are very good. It is very recommended.
Verified purchase: Yes | Condition: New
Pros: Good value. Works well. Cons:Assembly instructions hard to understand and incomplete.
Verified purchase: Yes | Condition: New