 |
As purchased from an eBay vendor, this drop-in Ruger factory trigger is less expensive than loose parts from Volquartsen or Clark Custom, and you don't have to install any parts in your old trigger housing. Pull weight comes in at just a shade less than three pounds, and the break is fairly crisp. That said, this is a new plastic housing, not metal, and the trigger itself does not have an overtravel screw. The bolt release is the clumsy press-to-release that most people get rid of right away. The good news is that the BX trigger disassembles and reassembles pretty much like the factory unit, and most of the parts are standard spec. I was able to install a modified pull-to-release bolt release and a left-handed safety, and the reassembled unit performed exactly as it did when I took it out of the factory packaging.Read full review
Verified purchase: Yes | Condition: New
Do not expect a rounded metal trigger like the original. You get plastic with sharp edges. The creep/takeup is horrendous. Breaks at apx 3 lbs. Safety is noisy and very gritty-enough to scare close game. Lubrication and working of the safety made it no better but it did its job. For my use the 3 lb trigger makes it acceptable compared to the 8 lb pull on it before, but its not what I would expect from Ruger. Too bad Ruger now farms out much of their stuff. Shipping on this product was very fast and flawless.
Verified purchase: Yes | Condition: New
I own two 10-22s. One of them has been my favorite go-to plinker for several years (several decades, actually).. I never thought the trigger was too bad, especially when comparing it to an old Winchester .22 my brother used, until I purchased a Savage FV-SR ( a Mark II with an Accu-Trigger). Boy, did I get spoiled. Now my 10-22 wasn't as fun to shoot any more. I put a scale on the trigger, and it broke at just over 8#. Hmmmmm... So, last year, after reading some reviews, I bit the bullet and bought a BX Trigger to replace my old one. What a difference! It breaks crisply at 2-1/2#, and there's no creep. My groups have really tightened up. Who would have thought? What about my second 10-22. This is one I bought used. The original owner had already "worked" the trigger and it already broke at 2-1/2#. However, it was a bit rough and creepy, and the owner must have worked the springs, too, because every now and then, I'd experience a string of failure-to-fire because of light hammer strikes. This last month, I also replaced that trigger group with a BX Trigger assembly. Just like on my first 10-22, the new trigger breaks crisply at 2-1/2# and no creep. And, because I replaced the whole assembly (tha't what the BX Trigger is--the whole shebang), all the springs are new and correct. That took care of my light strike issue. I haven't had a FTF since. So, if you're wondering if the cost is worth it (it is, after all, around $60 for this trigger), it is. Will your 10-22 run better? It will. I think you'll be amazed as to how much better it will "feel" and how much better you can shoot. And if you're having issues with worn trigger parts and springs, this will take care of that, because you'll be replacing the entire trigger assembly. And as a bonus, you'll be getting an upgraded magazine release. Once you get used to it (after all I'd been using the old style release for over 40 years, now), it makes dropping an empty magazine a whole lot easier. Is it easy to install? Yes, it is. Unscrew the stock from the barrel and action. Pull two pins on the action to drop the old trigger assembly out and put in the new BX Trigger assembly using the same two pins. It'll take about 10 minutes to do the whole job. I've been recommending this Ruger-made BX Trigger to everyone I know who owns a 10-22 with an old trigger. I cannot say enough about how a simple trigger change, can make such a big difference in how much better your 10-22 functions and shoots. Like me, you'll wonder why you didn't do this years ago.Read full review
Verified purchase: Yes | Condition: New
*Disclaimer* The "No" recommendation and the "Good" rating is solely based on my opinion. Someone else may have a totally different opinion. The trigger IS much lighter than the production trigger, just as advertised. It is well made. I did not like the way it felt. It has too much take up, creep, and lateral slop for my liking ( I'm very picky about my triggers). It can be modified, and can be made better, for a cost. The trigger mod for the BX will result in a better lighter, no slop, no creep trigger group and afterwards, it will function as a two stage trigger group. I want a light, crisp, single stage trigger, not a two stage. That is why I decided to return it to the seller and go a different route. Bottom line, the pull is lighter than production. It has creep. It has take up, it has lateral play. It can be made better. It will function as a 2 stage after modification. Do your research. Take my review with a grain of salt, but take it and use it to help you make an informed purchase and an informed decision when modifying your rifle.Read full review
Verified purchase: Yes | Condition: New
Clearly the best upgrade you can do to your 10/22, mine is a good 2.5 lbs trigger weight. For a first timer like me the 5 lbs trigger of the original was not really hard to pull, but its a big difference once you replace it, its very noticeable. The actual replacement is really easy, just replace the whole trigger at current price point 50+ Its a no hassle way of reducing your trigger weight, also give you extra original spare parts as the parts for this and the original is entirely the same except maybe the hammer.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Rifle Parts
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Rifle Parts
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
