 |
I needed to repair a couple of plastic retainers for the drawer guides inside of an old dresser; the plastic retainers broke apart (probably from someone leaning on the drawers and/or too heavy a load inside of them) leaving the wooden guide flopping around and the drawer sagging when pulled out. Replacement retainers seem to be out of production, and other epoxies I've used in the past on plastic really didn't seem to hold well, so I was a bit skeptical that this one would hold well enough to repair the drawer guide retainers. But I followed the instructions for application -- the syringe made dispensing the proper ratios easy -- and the drawer guide retainers now seem strong as new! I then gave the stuff a try on a piece that had broken away from the plastic shroud on the roll-up security screen in my '89 Firebird; like most glues I've tried on this particular plastic, this epoxy was reluctant to bond -- at first. But once it began to set it seemed to grab ahold and form a good bond. I guess time will tell if the bond holds up, but the shroud is mainly cosmetic so I'm optimistic about the long-term survivability prospects. A few things to be aware of: while the syringe is very handy, it is not a precise measuring device; meaning if you're trying to dispense just a tiny bit, you will likely get more than you wanted. A dime-sized blob is probably the minimum product it will dispense. Also, be sure to quickly clean up any spills, drips, etc. from areas you didn't want the epoxy applied; once this epoxy has cured it will be a pain to get off of places where you really didn't want it and where sanding isn't an option to remove the excess (ask me how I know...).Read full review
Verified purchase: Yes | Condition: New
This is the best product that I have found to repair just about anything. I reccomend this product because it does what it claims to do.
Verified purchase: Yes | Condition: New
I purchased this product in order to fix a broken hard plastic component in the center console of my Dodge Grand Caravan. This product was recommended and was very easy to use with little to no mess. So far, the fix has held very well and the drawer in the console functions as is should. I am very happy with this product and would highly recommend it.
Verified purchase: Yes | Condition: New
I have been using this for quite awhile for all types of plastic, as well as carbon fiber. You have only a couple of minutes working time, hardens in 5 minutes, and is hard in one hour. The strongest plastic cement/epoxy I have ever used in over 50 years of model building.
Verified purchase: Yes | Condition: New
I had a broken plastic part on my 2014 truck is was 1,200.00 dollars for a new one. I used your product to glue my broken part back together it works perfect I saved 1,180.00 dollars thanks Bill
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Multi-Component Epoxies
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Multi-Component Epoxies
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
